Custom Walking
Floor Trailers
Each GLT trailer is purpose-built for your specific application, offering a range of specifications that allow you to haul materials such as wet products, rubbish, woodchips, and construction waste.
Designed and manufactured in Australia, these trailers feature the highest quality parts and materials to ensure durability and reliability.
Walking Floor - Lead
| Detail: | Measurement: |
|---|---|
| Length: | 21’4″ to 32’10” |
| Height: | 4′ to 8’6″ |
| Capacity: | 20 to 63 cubic metres |
| Tare Weight: | 5.6 to 7 tonnes |
Walking Floor - Tag
| Detail: | Measurement: |
|---|---|
| Length: | 27’11” to 48′ |
| Height: | 4′ to 8’6′ |
| Capacity: | 25 to 105 cubic metres |
| Tare Weight: | 5.7 to 8.9 tonnes |
This body type is standard on lead rollback moving floors. Tag moving floors can select this option or the wedge body type.
To achieve maximum cubic capacity our engineers have given the floor a 1 degree drop. This gives you a 240mm drop over a 45’ unit.
Our standard front sheet for a Walking Floor is 5mm thick with a polished finish. Other thicknesses and finishes are available.
This option will match the finish of a plank sided trailer.
By far our most popular option. The tarp rolls up neat and tidy out of the way when loading. When unrolled, the tarp offers a high level of cover to protect your load. Compared to the QLD style tarp, the roll over is easier for the operator to use, reducing OH&S risks. Side drop is 300mm standard and can be increased to 600mm. A full range of colours available. Razor electronic tarp upgrade available on this tarp.
If you want the most water proof tarp option, tick this option. Tarps come standard with 300mm long flaps front and rear which are pull down tight to seal the front and rear of the tub. The side drop is standard at 600mm. This gives you a bit of extra room to roll over the heaped loads while still getting a tight seal along the side of the tub. A full range of colours are available.
These tarps retract forward to allow loading. The rear part of the tarp has a flap end which is pulled down tight to seal the rear of the trailer once loaded. The tarp supports can range from 200mm to 350mm high. Retractable tarps are not waterproof and leaking can occur. A full range of colours are available.
Our standard light spacing interval is 1300-1500mm. If you want more light bling then we can go as close as 300mm between lights. We also offer lights at the top of the side sheets at matching intervals.
Tailgate pivots from the top only.
Tailgate can pivot from either the top of the side. A parrot break and pivot bold is needed to allow the 2 way system to work.
This door style uses container style locks and stainless steel hinges. The doors can be fixed open with latches.
Our most popular type of hinge. This hinge sits outside of the body.
This hinge allows for the rear door to close flush. Some people say that this hinge type is pretty good looking, too.
The rear of the tailgate has the internal support posts exposed. This style door is our lightest door.
This style gives the door a clean finish. There is a weight penalty of around 50-80kgs. The inside of the door is still a flush finish just like the standard tailgate.
The fingers and assembly are fabricated from stainless steel. You can choose from either manually operated or air-operated. Air-operated 4-finger locks have a single air ram, which provides locking force.
The fingers and assembly are fabricated from stainless steel. You can choose from either manually operated or air-operated. Air operated 7 finger locks are 2 air rams which provides the locking force.
Select from either single or double manual grain locks. Our grain lock handles are fabricated from stainless steel. The wear pads are mounted to the tailgate and made from stainless steel.
We offer 2 different types of air grain locks. The upright and the horizontal verison. Both options give exceptional sealing pressure. Air grain locks are syncronised with the air finger locks - all off the one push/pull switch.
Recommend for operators wanting to cart products such as hides. These locks are manually operated and provide excellent sealing pressure. The door plug seals the grain door water tight.
This option is suited to tailgates where clearance with the ground or other trailers is an issue. We can do a single or a double split. The split is controlled by a single or twin air ram.
A popular option. The vinyl is applied in 1400mm wide drops with a slight overlap. Each drop can be replaced if they get damaged, making it less expensive to maintain compared to paint. Select from a large range of colour options.
Dress up your radius guards with chrome dress strips. These look great and finish off the guard area nicely.
Another well-known EBS unit popular with our clients. This unit offers stability control and EBS braking. Knorr Bremse offer excellent technical aftersales support.
If safety is high on your list when operating, then you need to consider the Wabco EBS system. This electrically-controlled braking system helps to reduce the risk of serious accidents.
This special lining will give the floor sheet extra protection as well as provide a slick surface to reduce friction. This style of lining will increase the chances of contamination if you are hauling different loads.
Choose from either aluminium or steel. We have a range of thicknesses to suit your needs. Wear plate can be added to the floor or walls.
Are you needing to protect your side sheets from abrasive loads? Rock sheeting will extend the life of your trailer. We use 4mm pressed plate and can be added to the sides, front sheet and door.
Lead B-Double units are a rollback style. The body rolls to the rear position on the chassis via two hydraulic cylinders before discharging. Tag walking floor trailers can be either straight or wedge style. Select from a range of industry leading floor manufacturers which include Keith, Matilda and Cargo Floor.
Each walking floor or moving floor has a full stainless steel rear bar and rear post assembly. All nuts, bolts and washers are stainless steel.
Each walking floor/live bottom trailer chassis is Hi-definition plasma cut cut. Our steel fabrication team are highly skilled qualified tradesmen. Miller digital pulse welders are used to lay a clean weld.
All edges on flanges are sanded and polished to reduce the chances of cracking and also to help paint adhere to the steel.
Wanting further weight savings on your walking floor? Then select our aluminium beams, cross members and suspension hanger option. This will reduce trailer tare weight by around 600kg.
GLT chassis are optimised for Hendrickson Intraax airbag suspension and axles. Other brands such as BPW, SAF and K-Hitch can be optioned. Subtle design changes are made to the chassis to accommodate these different suspension brands ride characteristics.
GLT chassis are optimised for Hendrickson INTRAAX air bag suspension and Hendrickson axles. Other brands such as BPW, SAF and K-Hitch can also be equipped if requested. GLT is an authorised Hendrickson dealer which allows us to offer greater after-sales support.
Air bag suspension offers better ride quality, low tare weight and simplified ways of reading load weights. The prefered brands which we supply have passed our field testing protocol and have excellent after sales support. All trailers with air bag suspension are equipped with ball valve taps to isolate individual bags. These taps will allow you to shut off an air bag if it has an issue.
We custom create your trailer end-to-end, to suit your specific requirements
Our trailers are designed and made with ease of use and the operator’s safety top of mind.
We have high standards and are committed to quality. Get a trailer you’ll be proud to put your business name on.
Contact our team to discuss your customised trailer requirements to receive tailored advice and a quote.
